How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique procedure to add an additional key. It requires dealer service with a handheld computer dubbed Tech-2. Then the transponder is replaced and a key are required to be purchased.
Rotate your keys to stop one from wearing out more than the next. This will help to keep your keys in perfect condition.
Replacement Case
As opposed to the traditional Saab keys of the past keys, the latest key fobs have electronics inside which makes it hard to duplicate. This has made theft of cars much more difficult than twenty years ago. However, it has made the replacement of lost keys a more expensive task.
Every owner of a 9-3 Saab should have at minimum two working keys. If one gets lost, it is expensive to replace it in the car, as it requires replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100 and $200 for this.
There are options to avoid these costs. Some parts dealers will use the code of a spare key to cut a brand new metal blade for less than what the dealer charges. The key, however, must be the same as the original to work correctly in your car.
Follow these steps to replace the case. You'll need an open-faced screwdriver and patience. With the screwdriver slowly pry the plastic apart and remove the emergency key from the case. Once the case is open take the electronics out and place them in your new case. Put the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery for the remote key fob in just four steps. This tutorial can be used with any modern Saab key fob. However, the procedure could differ slightly.
The button is typically located near the Saab logo on the back of the fob. It's usually close to the Saab logo on the back of the fob. Next you will need a flathead screwdriver into the small hole of this button. This will allow you to open the fob's case to allow you to replace the battery.
After you have installed the new batteries CR1632, it is possible to put back together your remote key fob. Then, you can program it into your car. The entire process should take no more than an hour at most. This is a very easy procedure that doesn't require special tools.
The process can be a bit more complicated if you lose your key, but it's possible. The dealer has to first verify the VIN of the vehicle, and then purchase an additional TWICE module and key blade that has the correct unique code. The dealer will then need to program the key using MDI, a brand new software tool.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your car. Batteries have a limited lifespan and will eventually die. This is a common problem that occurs with all vehicles, and the good news is that you can replace the batteries in many key fobs without replacing the entire case. Amazon sells replacement fobs that already have all the electronic components in place. replacement saab key can simply pop the case open and replace the batteries. You'll need to take out the emergency key before you replace the batteries. To accomplish this, simply insert an small screwdriver with a flat head into the slot that is in the middle. The case will split once you work the screwdriver all around it.
If you're ready to replace your keys, make sure you have a spare on hand. This can save you a lot of money. If you have an additional key, you can ask the dealer to cut it in half and program it to your car. This is much cheaper than buying a new key fob.
If you don't have a spare car key, you can add a second key to your car, but it requires a lot of research and effort. It costs a few hundred dollars to add a second car key. The computer in the car also needs to be programmed. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
As opposed to the earlier Saab automobiles, the new SAAB 9-3 models are equipped with an extremely sophisticated alarm system that is based on a coded key. This means that in the event that you lose your only working key, adding another one could be very costly since the car needs to have a computer module added and it must also be programmed to accept an additional key. Most locksmiths can't do this, and even dealers will charge hundreds of dollars just to program the new key!
Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your only working key. We can reprogramme the existing EEPROM of your car's computer to make it ready for an additional key. This will save you more than 50% off the price you'd pay at a dealer.
If you've owned a SAAB 9-3 a long time you are aware that the ignition keys are not very durable. They can become extremely sticky, and the buttons are known to be removed from them occasionally and you should think about getting a replacement if yours isn't working as it should. It's good to know that replacing the ignition key isn't as difficult as it sounds and can be done in a short time using the appropriate tools.